GREY PRIMER PAINT AEROSOL
Shake can vigorously for two minutes.
Modern acrylic formulation provides a durable finish with enhanced covering power. It also enables you to spray directly on to many rigid plastic surfaces, e.g. bumpers, without special pre-treatment.
Directions for use:
After fully preparing the area to be painted, ensuring it to be free from dirt, wax, oil etc. Test on a similar surface using a back and forth action. Spraying at a distance of 25cm, thinly applied coats built up at 10 to 15 minute intervals will achieve best results. Leave for 24 hours to harden. After use invert can and spray to clear nozzle, or remove nozzle to clear with a pin. Minimum operating temperature 15 degrees.
Product Brand may vary.