Low maintenance wet look floor polish.
Easy to use - no burnishing required.
Maximum scuff resistance
Low maintenance requirements
Dries to a wet look.
Protects and prolongs the life of flooring materials.
Modern antistatic formulation.
Uses:
For all linoleum, PVC, rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors.
DIRECTIONS:
Polish must be applied to a clean grease free floor.
Strip old polish with an alkaline stripper then rinse thoroughly with clean water and allow the floor to dry. Apply a thin even film of polish using a clean lint free mop or applicator. Apply a second coat when the first coat is dry (approx 30 mins). May be buffed as required to enhance gloss.
Coverage: 60 square metres per litre.
Maintenance: Damp mopping: Spray cleaning/burnishing: